10 Apps To Help You Control Your Peugeot 308 Key Fob
Peugeot 308 Key Fob Replacement
Peugeot's 308 may be slightly old, but it is still striking. It might not be the most luxurious car in its class and a Ford Focus or Volkswagen Golf will help you stay away from road imperfections, but it's still a pleasant and comfortable driving experience.
We often receive requests from Coded Car Keys to replace peugeot key fobs. Whether the problem is ongoing or continuous these tips will aid.
Water Damage
If you accidentally drop your fob in the midst of a puddle or splash it with water while swimming, kayaking, canoeing, rafting or canyoning, it's most likely to suffer water damage. Keep your key fob in a dry container whenever you go outside or engage in activities that could expose it to large amounts of water.
It's also crucial to ensure sure the fob has completely dried before you open the fob and then use it. If you notice any odors emanating from the fob like an industrial liquid smell or that of windshield washer fluid, it's another indication that it's submerged in water.
A circuit that is wet can cause the battery's charge to be drained or even explode. If you can remove your keyfob 308 from the water you need to turn the button side up and shake as much water as possible before opening the casing. When you've opened it, remove the battery, and then clean the circuit board with an abrasive soaked in 90-percent isopropyl alcohol.
Other reasons why your Peugeot 308 remote keyless entry system could fail to function include the battery of your coin is dead, receiver module issues, signal interference, or a faulty electronic chip. If none of the above is the problem it is possible to reset the system by removing the 12 volt battery from your car for 15 mins.
Dead Coin Battery
Peugeot cars come with remote start which allows drivers to start their car from an extended distance, which allows them to warm up or cool down the vehicle before they get in. This feature is extremely beneficial, especially during winter's cold and chilly months. The remote start system can stop working for a variety reasons, such as the dead battery in the coin-battery.
The coin-shaped battery inside the key fob will last between two and four years based on how frequently it is used, where it was purchased, and the way it is used. The date of use is usually found on the packaging or in the manual.
If the key fob stops working after exposure to water that is clean, you should take the battery off, clean the electronic chip with a paper towel and isopropyl alcohol, and then dry it completely before replacing it. If exposed to soapy or salty water, the chip could be damaged and you'll require replacing the key fob altogether.
If you're unsure if the battery is in good condition you can check its voltage with an instrument set to the car's voltage range, and connect it to the terminals for minus and plus. The voltage should be between 12-13 volts but if it's lower, the battery must be replaced. You can also reset the computer in the onboard computer by disconnection and reconnecting the 12 volt batteries in reverse order. (positive cable first, then negative cable). The engine should now start.
Faulty Receiver Module
If you're not seeing the "Key Detected" message on your dashboard, then it's possible that your receiver module has created a fault. It's that part that sends an indication to the car when your key fob is activated which acts as an immobiliser. It stops it from starting until the correct key is present.
It could be due to several causes, such as water damage or simply ageing. If the electronic chip in your peugeot 206 remote key replacement 308 keyfob is damaged due to dirty tap water it could be due to the fact that the keyfob was exposed to it. In this situation you'll need to remove the device apart and thoroughly clean it with isopropyl or electronic cleaner. Once it's dry you can put the battery back in and try it again.
If the issue persists then it's a good idea to seek out a local Peugeot specialist or locksmith. They'll be able to employ a diagnostic tool identify the issue and repair it for you.
The loss of your peugeot car key supplier car keys could be an incredibly stressful experience. A qualified auto locksmith will be able to solve the problem within minutes. They can cut a brand new key and then program it into your vehicle, making sure you're back to the road as fast as you can. Click here to find a locksmith near you.
Faulty Electronic Chip
The chip in the Peugeot 308 key fob is a critical role in the remote control system. If the chip is damaged, you could have problems starting your car or receive a message that says "anti-theft". If this occurs, the only solution to fix the issue is to replace the key. Fortunately, auto locksmiths with experience can provide the service in the shortest amount of time.
The chip in the key fob of your Peugeot 308 could be damaged due to a variety of reasons, including water damage, sweat or dirt. If your Peugeot 308 key fob is exposed to soapy water, it is recommended to clean it right away. You can employ a paper towel as well as isopropyl alcohol for cleaning the electronic component. The battery must then be allowed to dry completely.
Radio interference can cause a key fob's functionality to cease. This could be caused by other devices that operate on the same frequency as your Peugeot key fob. It could be caused by bad conditions or objects near to the vehicle. If you have this issue it is advised to visit the peugeot 207 new key dealership.
The Peugeot 207/308 key fob is extremely delicate and requires a lot of attention. It is not recommended to drop it or throw it around. If you lose it, try to locate it as quickly as is possible. You can reset the on-board computer by disconnection of the battery for a few minutes. Make sure you disconnect the negative cable first before connecting the positive.