The One Ghost Immobiliser Problems Trick Every Person Should Know

Protect Your Pride And Joy With The Ghost Immobiliser

Secure your prized possessions against theft with the Ghost Immobiliser. This system is discrete and does not require additional key fobs.

The device uses existing buttons on your vehicle (steering wheel, door panels & centre console) to create a unique pin code sequence of up to 20 presses. This will then allow the startup of your vehicle.

Simple PIN code change process

Many homeowners are upgrading their security due to the rise in vehicle theft. There are a myriad of security devices that are sold aftermarket, from tracking systems to immobilisers and alarms. However there are a few that are equally effective in protecting your car. While a tracking system may assist you in locating your vehicle in the case of theft, it does not prevent the crime from happening in the first instance. An immobiliser, on the contrary, does exactly what it says on the tin: it shuts down the engine of your car to prevent it from being started. The Autowatch Ghost is one of the most sophisticated options available, making it nearly impossible for thieves steal your vehicle.

The ghost device utilizes the buttons on your car to create a unique sequence which must be entered in order for the engine to start. This can be accomplished by using the window, heater or indicator stalk buttons. There is also a mobile application that can be used as an emergency PIN override, allowing the driver to operate their car without the button sequence. This feature is particularly beneficial if you have to surrender your car for valet parking or servicing, as the immobiliser will still be activated, but not disabled.

The range rover sport ghost installer is a very unique and innovative device which works in conjunction with buttons of your car instead of being a separate unit. This means that it's not just a highly effective protection against theft of your vehicle, but can also be transferred onto any other vehicles you have, making it more valuable than the traditional lock on your steering wheel.

Weatherproof small device

The Autowatch Ghost Immobiliser is an advanced security device that shields your pride & joy from key cloning and hacking. It also blocks ECU swapping. It is a weatherproof tiny device that communicates directly with your vehicle's ECU over the CAN data bus, which disables the engine. It can be installed in the vehicle without any wiring and has been thoroughly tested to ensure compatibility with all vehicles. It also is resistant to jamming devices which is a common technique used by car thieves to circumvent existing immobilisers.

The benefit of CAN data over traditional systems is that they operate silently. It isn't detected by sophisticated RF scanning and code-grabbing techniques and cannot be recognized by conventional diagnostic tools. The Autowatch Ghost does not use LED indicators but instead utilizes buttons in your vehicle, like the steering wheel, the centre console, or doors, to create an unique sequence of disarming. You can even create a sequence that is up to 20 presses long to increase security. The iPhone app permits only one, authenticated connection with a pairing code that is unique to the ghost Installers Near Me and the communication between the two is encrypted.

The Ghost also stops car thieves from adding the key to a new car or replacing the ECU to bypass the immobiliser and start the engine. It will only allow the engine to start when the correct PIN code is entered. It is also possible to put it into Valet/Service mode for temporary operation (with defined parameters like a 30mph speed limit) so that you can transfer your vehicle to a valet service to be serviced without needing to enter a PIN.

Every vehicle is tested

The Autowatch Ghost is a world-first aftermarket CANbus immobiliser. It can be connected to the wiring of your vehicle and also to the engine control unit (ECU). The device intercepts signals to stop your car from starting up normally until you enter a custom code. The system can be activated or deactivated using your own smartphone app without the need for wires.

The standard factory immobilisers function by using a transponder that is integrated into the key. This sends a message to the ECU. If the correct code is transmitted the car will begin, but if a transponder is replaced by one from another vehicle the immobiliser cannot recognize it. This allows the vehicle be started and stolen. A South African company that is at the forefront of car security systems technology has developed the Ghost immobiliser. It protects you from hacking or key cloning and even key theft. Only by physically towing your vehicle away can thieves steal it and not be able to drive it.

bmw m3 ghost installer makes use of buttons in your vehicle, such as the indicator stalk, the steering wheel, and door panels, to create an individual PIN code that must be entered to use your car. This is done without any additional hardware, like key fobs. It can take up 20 to 20 presses. It is also undetectable by diagnostic equipment and does transmit radio frequency signals, so thieves cannot use sophisticated RF scanners or code grabbing technologies to identify that an installation has been made.

Unlike physical anti-theft devices like clamps or wheel locks, Ghost is covertly integrated into the vehicle, so it cannot be taken away or disabled by thieves. It's more difficult to remove than a car alarm, which requires disarming via the use of a button sequence. This makes it a perfect alternative to a GPS tracker which helps locate your car after it has been stolen.

Emergency PIN code override

You don't need to look far on social media to see stories or even videos of vehicles that have been taken by car thieves using the most advanced technology tools available to them. This includes key-cloning and hacking tools that allow the vehicle to start without your original key fobs.

Our Ghost 2 immobiliser immobiliser combats this issue and offers an additional layer of protection to stop your vehicle from being stolen if it is targeted by thieves. It generates an individual pin code by pressing the buttons on your steering wheel, door panel, and centre console. The unique pin code is entered alongside your original key fob to stop the engine from beginning. The unique override pin is on the black card you will receive following installation. It's easy to remember as there aren't any LEDs.

The device is hidden in the wiring of the vehicle and does not emit radio signals. Therefore, it cannot be detected by diagnostic software which can identify the security system you have installed. This makes it an excellent alternative to an electronic device for tracking.

In contrast to other security systems that use a relay inside the engine bay these CANBUS Immobilisers communicate with the vehicle's ECU and BCM via CAN data bus (brand dependent). This allows them to disable a vehicle completely, by sending an electronic block to the ECU and engine.

These systems can also be linked to a separate alarm, immobiliser or tracker. This must be specified prior to the installation. They are also compatible with valet/service modes and is a great alternative to a tracking device when you take your car to the dealer for an electrical problem.

Service/Valet Mode

In recent times there has been an increase in the number of vehicles being stolen with no owner's keys. It's easier than ever before to take your joy and pride thanks to the availability of key cloning tools and door lock picks. We have created the Autowatch Ghost Immobiliser to combat this. It stops your vehicle from being driven even if you keys have been cloned.

It communicates directly to your cars ECU (Engine Control Unit) through the CAN data circuit. It's completely silent since it doesn't use radio frequencies or key fobs. This means it isn't detected by diagnostics or other car hacking devices. It also prevents you from adding an ECU or key to bypass the system as only the PIN code allows the engine to start.

The device is hidden within your vehicle and is accessed by existing buttons on your steering wheel, center console, and door panels. Before you can start your car, you need to enter a unique and changeable PIN code up to 20 numbers.

This is the first aftermarket CAN bus immobiliser that has been developed. It will prevent your vehicle from being driven or started if you don't enter a PIN code first. If the device is armed and you try to drive off it will display an indication on your dash, which will flash on a regular basis for approximately 300m, if you enter your PIN code during this time, it will deactivate the anti-hijack and your car will continue to operate just as normal. If you don't enter your PIN at this point the indicator will continue to flash and will require a new pin code every time you attempt to start your car.